Features:
• Intuitive touch display device for usage in industrial environments
• Wireless measuring units allow easy handling and more measurement flexibility
• Free measurement gives full alignment flexibility as measurement positions can be chosen freely and only 90° shaft rotation is required.
• Live view supports all alignment measurements and corrections
• Automatic alignment reports are saved in the machine library and can be customised with notes, pictures and QR code. All reports can be exported as pdf.
• The built-in camera allows pictures to be taken for reports. Machine identification is facilitated with automatic QR code identification and machine pictures in the library.

Video Url:
https://www.youtube.com/watch?v=cQxjYplrsRg

Sensors:
29 mm CCD; Inclinometer ±0.5° mm

Laser:
Red line laser class 2

Communication:
Bluetooth 4.0 LE or wired with USB cables

System measuring distance:
0.07 to 4 m mm

Measuring errors:
< 0.5% ±5 µm mm Operating time of measuring units: up to 16 hours Battery of measuring unit: rechargeable LiPo battery Operating time of display unit: up to 8 hours (100% backlight) Operating device: 5.6" colour resistive touchscreen LCD display High Impact PC/ABS with overmould Suitable operating devices: N/A Operating system requirements: N/A Software/App update: via USB stick Alignment applications: Horizontal shafts; Soft foot Alignment methods: 3 position measurement 9 -12 -3; Automatic measurement; Free measurement (only 90° shaft rotation needed) Live correction values: Vertical and horizontal Extra features: Machine library; Built-in photo camera; QR code reading; Screen orientation flip; Automatic .pdf report Fixture: 2x V-brackets (width 21 mm) with chains mm Shaft diameter: 20 to 150 mm; up to 300 mm with optional extension chains (not included) mm Maximum coupling height: 105 mm with standard rods; 195 mm with extension rods (included) mm Power adapter: Input: 100V-240V 50/60Hz AC with country adpaters for EU, US, UK, AUS included; Output: DC 12V 3A Environmental protection: IP 54 Operating temperature: 0 to 45 °C Carry case dimensions (l x w x h): 530 x 110 x 360 mm mm Calibration certificate: Supplied with 2 years validity Content: 2x measuring units (M&S); Display unit; 2x shaft V-brackets with chains 400 mm and threaded rods 150 mm; Chain tightening rod; 4x threaded extension rods 90 mm; Power supply with country adapters; 2x micro USB to USB cables; Measuring tape; Printed certificate of calibration and conformance; Printed quick start guide (EN); A4 sheet with 12 × QR code stickers; SKF carrying case mm.

The post TKSA 41- SKF appeared first on Wincorp Enterprises Inc..

Description:
The SKF Belt Alignment Tool TKBA 10 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley.
A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Features:
• Powerful magnets for fast and easy attachment
• Facilitates simultaneous adjustment of tension and alignment
• Can be used on almost all machines using V belts, banded belts, ribbed belts, and most other belts as well as chain sprockets
• Red laser for measurement distances up to 3 m (10 ft)
• Sturdy aluminum housings help ensure assembly stability and accuracy during the alignment process.

Video Url:
N/A

Laser Type:
Visible red line laser

Laser wavelength:
635 nm

Laser power:
<1 mW, class 2 Laser line length: 2 m at 2 m Measurement distance: 50 mm to 3 m Measurement accuracy angular: Better than 0.02° at 2 m Measurement accuracy offset: Better than 0.5 mm Mounting: Magnetic, side-mounted V-groove guides: N/A Operation time: 25 hours continuous operation Transmitter unit: 169 x 51 x 37 mm 365 g Receiver unit: 169 x 51 x 37 mm 340 g Reflector dimensions: 22 x 32 mm Battery: 2x AAA Alkaline type IEC LR03 Calibration certificate: Valid for two years Housing material: Aluminum, powder coat finish IP rating: IP40 Operating temperature: 0 to 40 °C Storage temperature: -20 to +60 °C Relative humidity: 10 to 90%, non-condensing Contents: 1x TKBA 10 transmitter unit; 1x TKBA 10 receiver unit; 2x AAA batteries; 1x Printed instructions for use; 1x Calibration certificate Case dimensions: 260 x 85 x 180 mm

The post TKBA 40 – SKF appeared first on Wincorp Enterprises Inc..

Description:
The SKF Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit helps the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel, or a combination of all three.

Features:
• Powerful magnets allow fast and easy attachment
• Three-dimensional target area simplifies detection and correction of misalignments
• Facilitates simultaneous adjustment of tension and alignment
• V-guides included for a wide range of V-belt pulleys
• Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
• Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as an accessory

Video Url:
https://www.youtube.com/watch?v=PGagKNHg-mU

Laser Type:
Visible red line laser

Laser wavelength:
632 nm

Laser power:
<1 mW, class 2 Laser line length: 3 m at 2 m Measurement distance: 50 mm to 6 m Measurement accuracy angular: Better than 0.2° at 2 m Measurement accuracy offset: Better than 0.5 mm Mounting: Magnetic, groove mounted (side mounting possible with optional adapter TMEB A2) V-groove guides: Size 1: 22 mm, short rods, 3x pairs; Size 2: 22 mm, long rods, 3x pairs; Size 3: 40 mm, short rods, 3x pairs; Size 4: 40 mm, long rods, 3x pairs Operation time: 20 hours continuous operation Transmitter unit 70 x 74 x 61 mm 320 g Receiver unit: 96 x 74 x 61 mm 270 g Reflector dimensions: N/A Battery: 2x AAA Alkaline type IEC LR03 Calibration certificate: Valid for two years Housing material: Extruded aluminum IP rating: IP40 Operating temperature: 0 to 40 °C Storage temperature: -20 to +65 °C Relative humidity: 10 to 90%, non-condensing Contents: 1x TKBA 40 transmitter unit; 1x TKBA 40 receiver unit; 2x AAA batteries; 4x sizes of V-guides, 3x pairs of each size; 1x Printed instructions for use; 1x Calibration certificate Case dimensions: 260 x 85 x 180 mm

The post TKBA 20 – SKF appeared first on Wincorp Enterprises Inc..

Description:
The SKF Belt Alignment Tool TKBA 10 allows pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley.
A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.

Features:
• Powerful magnets for fast and easy attachment
• Facilitates simultaneous adjustment of tension and alignment
• Can be used on almost all machines using V belts, banded belts, ribbed belts, and most other belts as well as chain sprockets
• Red laser for measurement distances up to 3 m (10 ft)
• Sturdy aluminum housings help ensure assembly stability and accuracy during the alignment process.

Video Url:
N/A

Laser Type:
Visible red line laser

Laser wavelength:
635 nm

Laser power:
<1 mW, class 2 Laser line length: 2 m at 2 m Measurement distance: 50 mm to 3 m Measurement accuracy angular: Better than 0.02° at 2 m Measurement accuracy offset: Better than 0.5 mm Mounting: Magnetic, side-mounted V-groove guides: N/A Operation time: 25 hours continuous operation Transmitter unit: 169 x 51 x 37 mm 365 g Receiver unit: 169 x 51 x 37 mm 340 g Reflector dimensions: 22 x 32 mm Battery: 2x AAA Alkaline type IEC LR03 Calibration certificate: Valid for two years Housing material: Aluminum, powder coat finish IP rating: IP40 Operating temperature: 0 to 40 °C Storage temperature: -20 to +60 °C Relative humidity: 10 to 90%, non-condensing Contents: 1x TKBA 10 transmitter unit; 1x TKBA 10 receiver unit; 2x AAA batteries; 1x Printed instructions for use; 1x Calibration certificate Case dimensions: 260 x 85 x 180 mm

The post TKBA 10 – SKF appeared first on Wincorp Enterprises Inc..

Subtitle:
Medium induction heater with a 120 kg bearing heating capacity

Description:
The SKF TIH 100m is a medium-sized induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater is supplied with a swivel yoke and two optional yokes for smaller bearings. The TIH 100m can heat small bearings with a bore diameter of just 20 mm and larger bearings with a maximum weight of 120 kg.

Features:
• Supplied with a swivel yoke and two smaller yokes, located in an integrated storage compartment
• Easy and safe to use with automatic temperature control or time-controlled heating
• Automatic demagnetization reduces the risk of bearing contamination
• Suitable for non-bearing applications for workpieces weighing up to 60 kg
• Automatic temperature hold function to keep the bearing hot after completion of the heating cycle.

Video URL:
https://www.youtube.com/watch?v=hr9wTC9dw7s

Maximum pressure:
N/A

Volume per stroke:
N/A

Bore diameter range:
20 – 400 mm

Operating area (w x h):
155 x 205 mm

Coil diameter:
110 mm

Standard yokes (included) for minimal bore diameter:
80;40;20 mm

Optional yokes for minimal bore diameter:
60;30 mm

Heating example (bearing, weight, temperature, time):
23156 CC/W33 97 kg 110 °C 20 min

SKF m20 performance:
97 kg

Max. power consumption:
3.6 kV·A

Voltage:
220-240 V/50-60 Hz

Temparature control:
20 to 250 °C

Demagnetisation according to SKF norms:
< 2 A/cm Max. heating temperature: 250 °C Dimensions (w x d x h): 570 x 230 x 350 mm Clamp dimensions (w x d x h): N/A Total weight (incl. yokes): 42 kg

The post TIH 100M/230V – SKF appeared first on Wincorp Enterprises Inc..

Subtitle:
Small induction heater with a 40 kg bearing heating capacity

Description:
The SKF TIH 030m is a small induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes and foldable support arms, the heater is capable of heating bearings with bore diameters of 20 mm or more and with a maximum weight of 40 kg.

Features:
• Easy and safe to use with automatic temperature control or time-controlled heating
• Automatic demagnetization reduces the risk of bearing contamination
• Suitable for non-bearing applications for workpieces weighing up to 20 kg
• Automatic temperature hold function to keep the bearing hot after completion of the heating cycle.

Video URL:
https://www.youtube.com/watch?v=hr9wTC9dw7s

Maximum pressure:
N/A

Volume per stroke:
N/A

Bore diameter range:
20 – 300 mm

Operating area (w x h):
100 x 135 mm

Coil diameter:
95 mm

Standard yokes (included) for minimal bore diameter:
65;40;20 mm

Optional yokes for minimal bore diameter:
30;60 mm

Heating example (bearing, weight, temperature, time):
23136 CC/W33 28 kg 110 °C 20 min

SKF m20 performance:
28 kg

Max. power consumption:
2 kV·A

Voltage:
220-240 V/50-60 Hz

Temparature control:
20 to 250 °C

Demagnetisation according to SKF norms:
< 2 A/cm Max. heating temperature: 250 °C Dimensions (w x d x h): 460 x 200 x 260 mm Clamp dimensions (w x d x h): N/A Total weight (incl. yokes): 20.9 kg

The post TIH 030M/230V – SKF appeared first on Wincorp Enterprises Inc..

Subtitle:
Small induction heater with a 40 kg bearing heating capacity

Description:
The SKF TIH 030m is a small induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes and foldable support arms, the heater is capable of heating bearings with bore diameters of 20 mm or more and with a maximum weight of 40 kg.

Features:
• Easy and safe to use with automatic temperature control or time-controlled heating
• Automatic demagnetization reduces the risk of bearing contamination
• Suitable for non-bearing applications for workpieces weighing up to 20 kg
• Automatic temperature hold function to keep the bearing hot after completion of the heating cycle.

Video URL:
https://www.youtube.com/watch?v=hr9wTC9dw7s

Maximum pressure:
N/A

Volume per stroke:
N/A

Bore diameter range:
20 – 300 mm

Operating area (w x h):
100 x 135 mm

Coil diameter:
95 mm

Standard yokes (included) for minimal bore diameter:
65;40;20 mm

Optional yokes for minimal bore diameter:
30;60 mm

Heating example (bearing, weight, temperature, time):
23136 CC/W33 28 kg 110 °C 20 min

SKF m20 performance:
28 kg

Max. power consumption:
2 kV·A

Voltage:
100-120 V/50-60 Hz

Temparature control:
20 to 250 °C

Demagnetisation according to SKF norms:
< 2 A/cm Max. heating temperature: 250 °C Dimensions (w x d x h): 460 x 200 x 260 mm Clamp dimensions (w x d x h): N/A Total weight (incl. yokes): 20.9 kg

The post TIH 030M/110V – SKF appeared first on Wincorp Enterprises Inc..

The post TMMP 3×300 – SKF appeared first on Wincorp Enterprises Inc..

The post TMMP 3×230 – SKF appeared first on Wincorp Enterprises Inc..

The post TMMP 3×185 – SKF appeared first on Wincorp Enterprises Inc..