Highly accurate tool for V-belt pulley alignment

The SKF Belt Alignment Tool TKBA 40 aligns V-belt pulleys in the grooves. V–guides and powerful magnets allow the TKBA 40 to be fitted in the grooves of the pulley. With only two components, a laser–emitting unit and a receiver unit, the belt alignment tool is easy to use and allows fast and accurate belt alignments. The three-dimensional target area on the receiver unit helps the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel, or a combination of all three.

• Powerful magnets allow fast and easy attachment
• Three-dimensional target area simplifies detection and correction of misalignments
• Facilitates simultaneous adjustment of tension and alignment
• V-guides included for a wide range of V-belt pulleys
• Aligns grooves of a V-belt pulley rather than its face, allowing optimum alignment of pulleys of unequal width or with dissimilar faces
• Special side adaptor for alignments of multi-ribbed and timing belt pulleys as well as sprockets is available as an accessory

Video Url:

Laser Type:
Visible red line laser

Laser wavelength:
632 nm

Laser power:
<1 mW, class 2 Laser line length: 3 m at 2 m Measurement distance: 50 mm to 6 m Measurement accuracy angular: Better than 0.2° at 2 m Measurement accuracy offset: Better than 0.5 mm Mounting: Magnetic, groove mounted (side mounting possible with optional adapter TMEB A2) V-groove guides: Size 1: 22 mm, short rods, 3x pairs; Size 2: 22 mm, long rods, 3x pairs; Size 3: 40 mm, short rods, 3x pairs; Size 4: 40 mm, long rods, 3x pairs Operation time: 20 hours continuous operation Transmitter unit 70 x 74 x 61 mm 320 g Receiver unit: 96 x 74 x 61 mm 270 g Reflector dimensions: N/A Battery: 2x AAA Alkaline type IEC LR03 Calibration certificate: Valid for two years Housing material: Extruded aluminum IP rating: IP40 Operating temperature: 0 to 40 °C Storage temperature: -20 to +65 °C Relative humidity: 10 to 90%, non-condensing Contents: 1x TKBA 40 transmitter unit; 1x TKBA 40 receiver unit; 2x AAA batteries; 4x sizes of V-guides, 3x pairs of each size; 1x Printed instructions for use; 1x Calibration certificate Case dimensions: 260 x 85 x 180 mm