Lubricants Archives - Wincorp Enterprises Inc.

LGWA 2/5 – SKF

codm — Fri, 12 Mar 2021 03:08:15 +0000

SKF bearing grease LGWA 2 in 5 kg can
SKF LGWA 2 is a premium quality mineral oil-based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for industrial and automotive applications when loads or temperatures exceed the range of general-purpose greases.
Typical applications:
• Wheel bearings in cars, trailers and trucks
• Washing machines
• Fan and electric motors
• Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods
• Protection of wheel bearings operating under severe conditions
• Effective lubrication in wet conditions
• Good water and corrosion resistance
• Excellent lubrication under high loads and low speeds

Operating temperature range:
-30 to +140 °C

Base oil viscosity:
185 cSt at 40 °C; 15 cSt at 100 °C

Dropping point DIN ISO 2176:
> 250 °C

DIN 51825 code:
KP2N-30

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 265-295; 100000 strokes, 10^-1 mm: + 50 max. (325 max.)

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: + 50 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
2 max. at 100 °C

EP performances DIN 51350:
Wear scar DIN 51350/5,1400N: < 1.6 mm; Weld load DIN 51350/4: > 2600 N

Rolling bearing grease life:
N/A

Fretting corrosion ASTM D4170, FAFNIR test:
N/A

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
5 kg can

Available packsizes:
200 g tube (LGWA 2/0.2); 420 ml cartridge (LGWA 2/0.4); 1 kg can (LGWA 2/1); 5 kg can (LGWA 2/5); 18 kg pail (LGWA 2/18); 50 kg drum (LGWA 2/50); 180 kg drum (LGWA 2/180)

Available for single-point lubrication:
SYSTEM 24 – LAGD: 60 ml (LAGD 60/WA2); SYSTEM 24 – LAGD: 125 ml (LAGD 125/WA2); SYSTEM 24 – TLSD: lubricator with 125 ml (TLSD 125/WA2); SYSTEM 24 – TLSD: lubricator with 250 ml (TLSD 250/WA2); SYSTEM 24 – TLSD: refill set 125 ml (LGWA 2/SD125); SYSTEM 24 – TLSD: refill set 250 ml (LGWA 2/SD250); TLMR: 120 ml cartridge (LGWA 2/MR120); TLMR: 120 ml cartridge with batteries (LGWA 2/MR120B); TLMR: 380 ml cartridge (LGWA 2/MR380); TLMR: 380 ml cartridge with batteries (LGWA 2/MR380B)

Certifications:

Shelf life:
5 years

The post LGWA 2/5 – SKF appeared first on Wincorp Enterprises Inc..

LGWA 2/1 – SKF

codm — Fri, 12 Mar 2021 03:01:53 +0000

SKF bearing grease LGWA 2 in 1 kg can
SKF LGWA 2 is a premium quality mineral oil-based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for industrial and automotive applications when loads or temperatures exceed the range of general-purpose greases.
Typical applications:
• Wheel bearings in cars, trailers and trucks
• Washing machines
• Fan and electric motors
• Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods
• Protection of wheel bearings operating under severe conditions
• Effective lubrication in wet conditions
• Good water and corrosion resistance
• Excellent lubrication under high loads and low speeds

Operating temperature range:
-30 to +140 °C

Base oil viscosity:
185 cSt at 40 °C; 15 cSt at 100 °C

Dropping point DIN ISO 2176:
> 250 °C

DIN 51825 code:
KP2N-30

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 265-295; 100000 strokes, 10^-1 mm: + 50 max. (325 max.)

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: + 50 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
2 max. at 100 °C

EP performances DIN 51350:
Wear scar DIN 51350/5,1400N: < 1.6 mm; Weld load DIN 51350/4: > 2600 N

Rolling bearing grease life:
N/A

Fretting corrosion ASTM D4170, FAFNIR test:
N/A

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
1 kg can

Available packsizes:
200 g tube (LGWA 2/0.2); 420 ml cartridge (LGWA 2/0.4); 1 kg can (LGWA 2/1); 5 kg can (LGWA 2/5); 18 kg pail (LGWA 2/18); 50 kg drum (LGWA 2/50); 180 kg drum (LGWA 2/180)

Certifications:

Shelf life:
5 years

The post LGWA 2/1 – SKF appeared first on Wincorp Enterprises Inc..

LGWA 2/0.4 – SKF

codm — Fri, 12 Mar 2021 02:56:10 +0000

SKF bearing grease LGWA 2 in 420 ml cartridge
SKF LGWA 2 is a premium quality mineral oil-based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for industrial and automotive applications when loads or temperatures exceed the range of general-purpose greases.
Typical applications:
• Wheel bearings in cars, trailers and trucks
• Washing machines
• Fan and electric motors
• Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods
• Protection of wheel bearings operating under severe conditions
• Effective lubrication in wet conditions
• Good water and corrosion resistance
• Excellent lubrication under high loads and low speeds

Operating temperature range:
-30 to +140 °C

Base oil viscosity:
185 cSt at 40 °C; 15 cSt at 100 °C

Dropping point DIN ISO 2176:
> 250 °C

DIN 51825 code:
KP2N-30

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 265-295; 100000 strokes, 10^-1 mm: + 50 max. (325 max.)

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: + 50 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0

Water resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
2 max. at 100 °C

EP performances DIN 51350:
Wear scar DIN 51350/5,1400N: < 1.6 mm; Weld load DIN 51350/4: > 2600 N

Rolling bearing grease life:
N/A

Fretting corrosion ASTM D4170, FAFNIR test:
N/A

Low temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
420 ml cartridge

Available packsizes:
200 g tube (LGWA 2/0.2); 420 ml cartridge (LGWA 2/0.4); 1 kg can (LGWA 2/1); 5 kg can (LGWA 2/5); 18 kg pail (LGWA 2/18); 50 kg drum (LGWA 2/50); 180 kg drum (LGWA 2/180)

Certifications:
N/A

Shelf life:
5 years

The post LGWA 2/0.4 – SKF appeared first on Wincorp Enterprises Inc..

LGWA 2/0.2 – SKF

codm — Fri, 12 Mar 2021 01:15:41 +0000

SKF bearing grease LGWA 2 in 200 g tube
SKF LGWA 2 is a premium quality mineral oil based, lithium complex grease with extreme pressure (EP) performance. LGWA 2 is recommended for industrial and automotive applications when loads or temperatures exceed the range of general purpose greases.
Typical applications:
• Wheel bearings in cars, trailers and trucks
• Washing machines
• Fan and electric motors
• Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods
• Protection of wheel bearings operating under severe conditions
• Effective lubrication in wet conditions
• Good water and corrosion resistance
• Excellent lubrication under high loads and low speeds

Operating temperature range:
-30 to +140 °C

Base oil viscosity:
185 cSt at 40 °C; 15 cSt at 100 °C

Dropping point DIN ISO 2176:
> 250 °C

DIN 51825 code:
KP2N-30

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 265-295; 100000 strokes, 10^-1 mm: + 50 max. (325 max.)

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: + 50 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water wash out: 0-0

Water resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
2 max. at 100 °C

EP performances DIN 51350:
Wear scar DIN 51350/5,1400N: < 1.6 mm; Weld load DIN 51350/4: > 2600 N

Rolling bearing grease life:
N/A

Fretting corrosion ASTM D4170, FAFNIR test:
N/A

Low temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
200 g tube

Available packsizes:
200 g tube (LGWA 2/0.2); 420 ml cartridge (LGWA 2/0.4); 1 kg can (LGWA 2/1); 5 kg can (LGWA 2/5); 18 kg pail (LGWA 2/18); 50 kg drum (LGWA 2/50); 180 kg drum (LGWA 2/180)

Available for single point lubrication:
SYSTEM 24 – LAGD: 60 ml (LAGD 60/WA2); SYSTEM 24 – LAGD: 125 ml (LAGD 125/WA2); SYSTEM 24 – TLSD: lubricator with 125 ml (TLSD 125/WA2); SYSTEM 24 – TLSD: lubricator with 250 ml (TLSD 250/WA2); SYSTEM 24 – TLSD: refill set 125 ml (LGWA 2/SD125); SYSTEM 24 – TLSD: refill set 250 ml (LGWA 2/SD250); TLMR: 120 ml cartridge (LGWA 2/MR120); TLMR: 120 ml cartridge with batteries (LGWA 2/MR120B); TLMR: 380 ml cartridge (LGWA 2/MR380); TLMR: 380 ml cartridge with batteries (LGWA 2/MR380B)

Certifications:

Shelf life:
5 years

The post LGWA 2/0.2 – SKF appeared first on Wincorp Enterprises Inc..

LGMT 3/1 – SKF

codm — Thu, 11 Mar 2021 04:32:19 +0000

SKF bearing grease LGMT 3 in 1 kg can
SKF LGMT 3 is a mineral oil based, lithium soap thickened grease. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive applications requiring stiff grease.
Typical applications:
• Bearings >100 mm (3.9 in.) shaft size
• Outer bearing ring rotation
• Vertical shaft applications
• Continuous high ambient temperatures >35 °C (95 °F)
• Propeller shafts
• Agricultural equipment
• Car, truck and trailer wheel bearings
• Large electric motors
• Excellent rust inhibiting properties
• High oxidation stability within its recommended temperature range

Operating temperature range:
-30 to +120 °C

Base oil viscosity:
125 cSt at 40 °C; 12 cSt at 100 °C

Dropping point DIN ISO 2176:
> 180 °C

DIN 51825 code:
K3K-30

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 220-250; 100000 strokes, 10^-1 mm: 280 max.

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: 295 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 2 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-3 %

Copper corrosion DIN 51811:
2 max. at 130 °C

EP performances DIN 51350:
N/A

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 130 °C

Fretting corrosion ASTM D4170, FAFNIR test:
N/A

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
1 kg can

Available packsizes:
420 ml cartridge (LGMT 3/0.4); 0,5 kg can (LGMT 3/0.5); 1 kg can (LGMT 3/1); 5 kg can (LGMT 3/5); 18 kg pail (LGMT 3/18); 50 kg drum (LGMT 3/50); 180 kg drum (LGMT 3/180)

Available for single-point lubrication:
TLMR: 380 ml cartridge (LGMT 3/MR380); TLMR: 380 ml cartridge for with batteries (LGMT 3/MR380B)

Certifications:

Shelf life:
5 years

The post LGMT 3/1 – SKF appeared first on Wincorp Enterprises Inc..

LGHP 2/5 – SKF

codm — Thu, 11 Mar 2021 04:17:10 +0000

SKF bearing grease LGHP 2 in 5 kg can
SKF LGHP 2 is a premium quality mineral oil-based grease, using a modern Polyurea (di-urea) thickener.
Typical applications:
• Electric motors: small, medium and large
• Industrial fans, including high-speed fans
• Water pumps
• Rolling bearings in textile, paper processing and drying machines
• Applications with medium and high-speed ball (and roller) bearings operating at medium and high temperatures
• Clutch release bearings
• Vertical shaft applications
• Kiln trucks and rollers
• Extremely long life at high temperatures
• Wide temperature range
• Excellent corrosion protection
• Hgh thermal and mechanical stability
• Good start-up performance at low temperatures
• Compatibility with common polyurea and lithium thickened greases
• Low noise properties

Operating temperature range:
-40 to +150 °C

Base oil viscosity:
96 cSt at 40 °C; 10,5 cSt at 100 °C

Dropping point DIN ISO 2176:
> 240 °C

DIN 51825 code:
K2N-40

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 245-275; 100000 strokes, 10^-1 mm: 365 max.

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: 365 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0; Saltwater test (100% saltwater): 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
1 max. at 150 °C

EP performances DIN 51350:
N/A

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 150 °C

Fretting corrosion ASTM D4170, FAFNIR test:
7 mg

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
5 kg can

Available packsizes:
420 ml cartridge (LGHP 2/0.4); 1 kg can (LGHP 2/1); 5 kg can (LGHP 2/5); 18 kg pail (LGHP 2/18); 50 kg drum (LGHP 2/50); 180 kg drum (LGHP 2/180)

Available for single-point lubrication:
SYSTEM 24 – LAGD: 60 ml (LAGD 60/HP2); SYSTEM 24 – LAGD: 125 ml (LAGD 125/HP2); SYSTEM 24 – TLSD: lubricator with 125 ml (TLSD 125/HP2); SYSTEM 24 – TLSD: lubricator with 250 ml (TLSD 250/HP2); SYSTEM 24 – TLSD: refill set 125 ml (LGHP 2/SD125); SYSTEM 24 – TLSD: refill set 250 ml (LGHP 2/SD250); TLMR: 380 ml cartridge (LGHP 2/MR380); TLMR: 380 ml cartridge with batteries (LGHP 2/MR380B)

Certifications:
N/A

Shelf life:
5 years

The post LGHP 2/5 – SKF appeared first on Wincorp Enterprises Inc..

LGHP 2/18 – SKF

codm — Thu, 11 Mar 2021 03:36:23 +0000

SKF bearing grease LGHP 2 in 18 kg pail
SKF LGHP 2 is a premium quality mineral oil-based grease, using a modern Polyurea (di-urea) thickener.
Typical applications:
• Electric motors: small, medium and large
• Industrial fans, including high-speed fans
• Water pumps
• Rolling bearings in textile, paper processing and drying machines
• Applications with medium and high-speed ball (and roller) bearings operating at medium and high temperatures
• Clutch release bearings
• Vertical shaft applications
• Kiln trucks and rollers
• Extremely long life at high temperatures
• Wide temperature range
• Excellent corrosion protection
• Hgh thermal and mechanical stability
• Good start-up performance at low temperatures
• Compatibility with common polyurea and lithium thickened greases
• Low noise properties

Operating temperature range:
-40 to +150 °C

Base oil viscosity:
96 cSt at 40 °C; 10,5 cSt at 100 °C

Dropping point DIN ISO 2176:
> 240 °C

DIN 51825 code:
K2N-40

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 245-275; 100000 strokes, 10^-1 mm: 365 max.

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: 365 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0; Saltwater test (100% saltwater): 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
1 max. at 150 °C

EP performances DIN 51350:
N/A

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 150 °C

Fretting corrosion ASTM D4170, FAFNIR test:
7 mg

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
18 kg pail

Available packsizes:
420 ml cartridge (LGHP 2/0.4); 1 kg can (LGHP 2/1); 5 kg can (LGHP 2/5); 18 kg pail (LGHP 2/18); 50 kg drum (LGHP 2/50); 180 kg drum (LGHP 2/180)

Certifications:
N/A

Shelf life:
5 years

The post LGHP 2/18 – SKF appeared first on Wincorp Enterprises Inc..

LGHP 2/1 – SKF

codm — Thu, 11 Mar 2021 03:18:52 +0000

SKF bearing grease LGHP 2 in 1 kg can
SKF LGHP 2 is a premium quality mineral oil-based grease, using a modern Polyurea (di-urea) thickener.
Typical applications:
• Electric motors: small, medium and large
• Industrial fans, including high-speed fans
• Water pumps
• Rolling bearings in textile, paper processing and drying machines
• Applications with medium and high-speed ball (and roller) bearings operating at medium and high temperatures
• Clutch release bearings
• Vertical shaft applications
• Kiln trucks and rollers
• Extremely long life at high temperatures
• Wide temperature range
• Excellent corrosion protection
• Hgh thermal and mechanical stability
• Good start-up performance at low temperatures
• Compatibility with common polyurea and lithium thickened greases
• Low noise properties

Operating temperature range:
-40 to +150 °C

Base oil viscosity:
96 cSt at 40 °C; 10,5 cSt at 100 °C

Dropping point DIN ISO 2176:
> 240 °C

DIN 51825 code:
K2N-40

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 245-275; 100000 strokes, 10^-1 mm: 365 max.

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: 365 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0; Saltwater test (100% saltwater): 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
1 max. at 150 °C

EP performances DIN 51350:
N/A

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 150 °C

Fretting corrosion ASTM D4170, FAFNIR test:
7 mg

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
1 kg can

Available packsizes:
420 ml cartridge (LGHP 2/0.4); 1 kg can (LGHP 2/1); 5 kg can (LGHP 2/5); 18 kg pail (LGHP 2/18); 50 kg drum (LGHP 2/50); 180 kg drum (LGHP 2/180)

Certifications:
N/A

Shelf life:
5 years

The post LGHP 2/1 – SKF appeared first on Wincorp Enterprises Inc..

LGHP 2/0.4 – SKF

codm — Thu, 11 Mar 2021 02:52:20 +0000

SKF bearing grease LGHP 2 in 420 ml cartridge
SKF LGHP 2 is a premium quality mineral oil-based grease, using a modern Polyurea (di-urea) thickener.
Typical applications:
• Electric motors: small, medium and large
• Industrial fans, including high-speed fans
• Water pumps
• Rolling bearings in textile, paper processing and drying machines
• Applications with medium and high-speed ball (and roller) bearings operating at medium and high temperatures
• Clutch release bearings
• Vertical shaft applications
• Kiln trucks and rollers
• Extremely long life at high temperatures
• Wide temperature range
• Excellent corrosion protection
• Hgh thermal and mechanical stability
• Good start-up performance at low temperatures
• Compatibility with common polyurea and lithium thickened greases
• Low noise properties

Operating temperature range:
-40 to +150 °C

Base oil viscosity:
96 cSt at 40 °C; 10,5 cSt at 100 °C

Dropping point DIN ISO 2176:
> 240 °C

DIN 51825 code:
K2N-40

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 245-275; 100000 strokes, 10^-1 mm: 365 max.

Roll stability ASTM D1831:
50 hours at 80 °C, 10^-1 mm: 365 max.

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0; Saltwater test (100% saltwater): 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 40 °C: 1-5 %

Copper corrosion DIN 51811:
1 max. at 150 °C

EP performances DIN 51350:
N/A

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 150 °C

Fretting corrosion ASTM D4170, FAFNIR test:
7 mg

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
420 ml cartridge

Available packsizes:
420 ml cartridge (LGHP 2/0.4); 1 kg can (LGHP 2/1); 5 kg can (LGHP 2/5); 18 kg pail (LGHP 2/18); 50 kg drum (LGHP 2/50); 180 kg drum (LGHP 2/180)

Certifications:
N/A

Shelf life:
5 years

The post LGHP 2/0.4 – SKF appeared first on Wincorp Enterprises Inc..

LGHB 2/5 – SKF

codm — Thu, 11 Mar 2021 01:22:26 +0000

SKF bearing grease LGHB 2 in 5 kg can
SKF LGHB 2 is a high viscosity, mineral oil-based grease, using the latest complex calcium-sulphonate soap technology. Formulated to withstand high temperatures and extreme loads, it is suitable for a wide range of applications, especially in cement, mining, and metal segments. This grease contains no additives and the extreme pressure properties arise from the soap structure.
Typical applications:
• Steel on steel plain bearings
• Pulp and paper making machines
• Asphalt vibrating screens
• Continuous casting machines
• Sealed spherical roller bearings operating up to 150 °C (300 °F)
• Work roll bearings in steel industry
• Mast rollersnof forklift trucks
• Excellent load capacity, anti-oxidation, and corrosion protection even with large water ingress
• Withstands peak temperatures of 200 °C (390 °F)

Operating temperature range:
-20 to +150 °C

Base oil viscosity:
400-450 cSt at 40 °C; 26,5 cSt at 100 °C

Dropping point DIN ISO 2176:
> 220 °C

DIN 51825 code:
KP2N-20

Penetration DIN ISO 2137:
60 strokes, 10^-1 mm: 265-295: 100000 strokes, 10^-1 mm: – 20 to + 50 (325 max.)

Roll stability ASTM D1831:
72 hours at 100 °C, 10^-1 mm: – 20 to + 50 change

SKF V2F test:
‘M’

Corrosion protection ISO 11007:
Standard (distilled water): 0-0; Water washout: 0-0; Saltwater test (100% saltwater): 0-0

Water-resistance DIN 51 807/1:
3 hours at 90 °C: 1 max.

Oil separation DIN 51 817:
7 days at 60 °C: 1-3 %

Copper corrosion DIN 51811:
2 max. at 150 °C

EP performances DIN 51350:
Wear scar DIN 51350/5,1400N: 0.86 mm; 4-ball test, welding load DIN 51350/4: > 4000 N

Rolling bearing grease life:
ROF test, L₅₀ life at 10000 r/min: > 1000 hrs at 130 °C

Fretting corrosion ASTM D4170, FAFNIR test:
0 mg

Low-temperature performance torque, ASTM D1478-63:
N/A

BeQuiet + test:
N/A

Packsize:
5 kg can

Available packsizes:
420 ml cartridge (LGHB 2/0.4); 5 kg can (LGHB 2/5); 18 kg pail (LGHB 2/18); 50 kg drum (LGHB 2/50); 180 kg drum (LGHB 2/180)

Available for single-point lubrication:
SYSTEM 24 – LAGD: 60 ml (LAGD 60/HB2); SYSTEM 24 – LAGD: 125 ml (LAGD 125/HB2); SYSTEM 24 – TLSD: lubricator with 125 ml (TLSD 125/HB2); SYSTEM 24 – TLSD: lubricator with 250 ml (TLSD 250/HB2); SYSTEM 24 – TLSD: refill set 125 ml (LGHB 2/SD125); SYSTEM 24 – TLSD: refill set 250 ml (LGHB 2/SD250); TLMR: 380 ml cartridge (LGHB 2/MR380); TLMR: 380 ml cartridge with batteries (LGHB 2/MR380B)

Certifications:
N/A

Shelf life:
5 years

The post LGHB 2/5 – SKF appeared first on Wincorp Enterprises Inc..